ENGINE
Type: Gasoline, water cooled.
Power: 30 hp (22.4 kW) continuous @ 3400 rpm.
Option: Diesel engine, water cooled, 30.2 hp (22.5 kW) continuous @ 3000 rpm.

SERVICE CAPACITIES
Fuel reservoir: 23 gal. (87.1 L)
Hydraulic oil reservoir: 14.65 gal. (55.45 L)

CONTROL SYSTEM
Type: Hydraulic, with controls in handle and front console of machine. The manual travel control valve, manual 3-point grade control, cross auger directional controls, engine controls and e-stop warning light are located in the handle. The vibrator control knob and cross-auger speed control knob are located on the machine’s front console.

HYDRAULIC SYSTEM
Pump: Load sense pump provides 21.4 gpm (81.0 Lpm) @ 3400 rpm.
Oil cooler: Air to oil cooler mounted in front of radiator to cool return oil.
Filtration: 100 mesh sump filter, one 3 micron return line filter and one 10 micron oil reservoir fill filter.

VIBRATOR with slipform mold (option)
Type: Hydraulically powered, motor in head, variable speed, independently controlled. Recommended when slipforming over vertical dowels or inserting longitudinal steel.

HOPPER CAPACITY
Concrete: 13 cu. ft. (.37 cu. m)
Asphalt: 7.09 cu. ft. (.2 cu. m)

CROSS-AUGER AND HOPPER
Adjustable: 12 in. (305 mm) sliding hopper.
Auger dimensions: 12 in. (305 mm) diameter by 4 ft. 8 in. (1.42 m) long for concrete. Removable paddles for slipforming.
Auger drive: Hydraulic motor direct coupled to auger shaft.
Auger speed: Up to 48 rpm.

EXTRUDING AUGER with mold (option)
Auger dimensions: 6 in. (152 mm) diameter by 24 in. (610 mm) long.
Auger drive: Hydraulic motor direct coupled to auger shaft.
Auger speed: Up to 61 rpm.

ASPHALT EXTRUSION ASSEMBLY with mold (option)
Asphalt extrusion kit includes a double skin hopper and auger, heavy duty extruding auger and drive, propane burner and propane tank.

TRACK AND WHEEL ASSEMBLIES
Track dimensions: One track, 23 in. (584 mm) long, 6 in. (152 mm) wide, by 9 in. (229 mm) high.
Track motor: 24 cid roller vane motor.
Wheel assemblies: Eight - 9 in. (229 mm) diameter by 3 in. (76 mm) wide wheels.
Travel speed: Up to 51 fpm (15.5 mpm) paving, 94 fpm (28.7 mpm) transport.
Track load: 1225 lbs. (555.7 kg). Ground pressure at 29 psi.
Wheel load: 1275 lbs. (578.3 kg) with weight equally distributed on eight wheels.

Optional three-track machine:
Track dimensions: 23 in. (584 mm) long, 6 in. (152 mm) wide, by 9 in. (229 mm) high.
Track motor: 24 cid roller vane motor.
Travel speed: Up to 51 fpm (15.5 mpm) paving, 94 fpm (28.7 mpm) transport.
Track load (rear): 1225 lbs. (555.7 kg). Ground pressure at 29 psi.
Track load (front): 1275 lbs. (578.3 kg), with weight evenly distributed on both tracks, ground pressure at 15 psi.

RADIUS
2 ft. (.61 m), depending on mold profile.

DIMENSIONS
Overall transport dimensions:
7 ft. 6 in. (2.29 m) long, 6 ft. 6 in. (1.98 m) wide, and 3 ft. 2 in. (.97 m) high.

Optional three-track overall dimensions:
8 ft. 5 in. (2.57 m) long, 6 ft. 6 in. (1.98 m) wide, and 3 ft. 2 in. (.97 m) high.

WEIGHT
2650 lbs. (1202 kg).

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. OR FOREIGN PATENTS: 3,299,786; 3,450,011; 3,541,931; 3,779,661; 3,959,977; 4,073,592; 4,136,993; 4,226,917; 4,343,513; 4,360,293; D-266,850; 853,607; 861,819; 954,773; 406,787; 1,147,187; 133,220; D-512,249; 4,717,282; 4,457,645; C-1,110,893; C-1,191,044; 12,890-1-0010; 5,061,115; 7,509,187; 7,509,615; 5,102,267; 5,101,360; 4,954,019; 4,984,639; 5,190,397; 5,209,602; 0,518,535; 2,067,126; 494,257; 69,031,836.7-08; 2,069,516; 5,924,817; 2,833,084; 7,044,680 AND PATENTS PENDING.

GOMACO Corporation reserves the right to make improvements in design, material, and/or changes in specifications at any time without notice and without incurring any obligation related to such changes.

Performance data is based on averages and may vary from machine to machine.