|
ENGINE
Type: Turbocharged diesel.
Make: John Deere 6068H.
Number of cylinders: 6.
Displacement: 6.8 L (415 in3).
Power: 250 hp (186.5 kW).
SERVICE CAPACITIES
Fuel reservoir: 86 gal. (326 L).
Hydraulic oil reservoir: 75 gal. (284 L).
Water tank: 130 gal. (492 L).
OPERATOR’S CONSOLE & CONTROL SYSTEM
Operator’s Console provides ultimate operator visibility during the entire operation. The operator’s console rolls from left to right on the platform to provide more comfort and visibility for the operator. The console can be set at five different positions. It can be positioned straight forward or turned 90 degrees to the left or to the right.
Sauer-Danfoss digital controller provides easy operation for track travel mode, track steering functions, safety programming with track overrides, ramping conveyor speed for a smooth operation, and proportional rear conveyor swing for a safe operation.
HYDRAULIC SYSTEM
Quantity of pumps: 6.
Conveyor circuits (2): Sauer-Danfoss medium-duty closed-loop.
Track circuits (2): Sauer-Danfoss heavy-duty closed-loop.
Auger circuit: Sauer-Danfoss heavy-duty closed-loop.
Auxiliary circuit: Sauer-Danfoss pressure compensated.
Oil cooler: Remote oil cooler with hydraulic powered fan.
RECEIVING HOPPER
Type: Auger-style hopper.
Width: 10 ft. 9 in. (3.28 m).
Working capacity: 4.75 yd3 (3.63 m3).
Truck pusher: Pivoting roller or optional quick hitch.
Hydraulic vertical adjustment: 12 in. (305 mm) hydraulic vertical adjustment to allow for gate height on dump trucks.
Vibration: Shaft-mounted eccentric vibrators provide vibration for emptying the hopper after each load and increase flowability.
Rubber hopper/truck seal: The hopper/truck seal is supported by a hydraulically tensioned cable for consistent sealing on a wide variety of dump truck bodies.
AUGER
Size: 14 in. (356 mm) diameter x 14 in. (356 mm) pitch.
Speed: Up to 88 rpm.
Flighting: Welded or removable.
CONVEYORS
(transfer conveyor and hydraulically folding rear conveyor)
Controls: Both conveyors are activated with a single switch and have individual speed controls.
Belt speed: 608 fpm (185 mpm).
Transfer conveyor width: 36 in. (914 mm).
Rear conveyor width: 36 in. (914 mm).
Rear conveyor length: 35 ft. (10.67 m).
Rear conveyor hydraulic elevation: 12 ft. (3.66 m).
Rear conveyor hydraulic swing: 170˚.
TRACK SYSTEM
Type: Two GOMACO friction drive rubber tracks.
Track width: 19 in. (483 mm).
Track length: 13.5 ft. (4.11 m).
Automatic tensioning: Hydraulic.
Bogie wheels: 13 in. (330 mm) diameter, 12 per track, steel/rubber, oscillating - 2 in. (51 mm) total vertical travel per wheel.
Idler wheels: 24 in. (610 mm) diameter, two per track, steel/rubber.
Final drive: Fairfield two-speed planetary with parking brake.
Pump & motors: Sauer-Danfoss heavy-duty, closed-loop.
Tractive effort: 20,000 lbf. (88,964 N).
Travel speed: Up to 9 mph (14.5 kph).
Work Speed: Up to 110 fpm (33.5 mpm).
Ground Pressure: 45,000 lb. (20,412 kg) empty: 9.1 psi (63 kPa) 64,000 lb. (29,030 kg) loaded: 13.2 psi (91 kPa).
DIMENSIONS
Shipping width with hopper: 11 ft. 9.31 in. (3.59 m).
Shipping width without hopper: 10 ft. 4 in. (3.15 m).
Shipping height with conveyor folded: 11 ft. 8.33 in. (3.56 m).
Shipping height without conveyor folded: 9 ft. 5.81 in. (2.89 m).
Shipping length with conveyor folded: 37 ft. 3 in. (11.35 m).
Dry machine weight: 45,000 lb. (20,412 kg).
Operational width: 11 ft. 9.31 in. (3.59 m) minimum width.
Operational length and height: Variable length and height, depending on conveyor positioning. (note: see drawings and dimensions on inside pages)
SAFETY FEATURES
• The conveyor must be centered and folded before machine will allow travel mode.
• There is no counter rotation of tracks in the travel mode.
• Programmed steering sensitivity provides balanced steering control at low or high speeds, preventing the operator from over-steering at high speeds.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. OR FOREIGN PATENTS: 3,299,786; 3,450,011; 3,541,931; 3,779,661; 3,959,977; 4,073,592; 4,136,993; 4,226,917; 4,343,513; 4,360,293; D-266,850; 853,607; 861,819; 954,773; 406,787; 1,147,187; 133,220; D-512,249; 4,717,282; 4,457,645; C-1,110,893; C-1,191,044; 12,890-1-0010; 5,061,115; 7,509,187; 7,509,615; 5,102,267; 5,101,360; 4,954,019; 4,984,639; 5,190,397; 5,209,602; 0,518,535; 2,067,126; 494,257; 69,031,836.7-08; 2,069,516; 5,924,817; 2,833,084 AND PATENTS PENDING.
GOMACO Corporation reserves the right to make improvements in design, material, and/or changes in specifications at any time without notice and without incurring any obligation related to such changes.
Performance data is based on averages and may vary from machine to machine.
|
