Top Navigation

T/C-400 Specifications

ENGINE
Type:
CAT diesel.
Power: 60 hp (44.8 kW) @ 2800 rpm.

 

SERVICE CAPACITIES
Fuel reservoir:
33 gal. (124.9 L).
Hydraulic oil reservoir: 57 gal. (215.8 L).

 

HYDRAULIC SYSTEM
Pumps:
One double-stage main pump provides 37 gpm (140 Lpm) @ 2150 rpm.
One main lift pump provides 11 gpm (41.6 Lpm) @ 2150 rpm.
Oil cooler: One electric fan forced-air oil cooler mounted on top of engine shroud.
Filtration: One twenty-five micron main filter.

 

AUTOMATIC CONTROL SYSTEM
Type:
Electronic-over-hydraulic.
Controls: GOMACO’s control system features forward and reverse steering and grade control and is sensored off the same stringline as the paver. This provides ease of operation and accuracy in texturing and curing.

 

TRACTION SYSTEM
Type: Two end cars, each having two hydraulically powered, foam-filled rubber flotation tires.
Tire size: 12 in. (305 mm) x 26 in. (660 mm).

 

FRAME
Construction:
All-steel welded frame, pin-connected main frame sections.
Width: Adjustable from 12 ft. 10 in. (3.91 m) up to 56 ft. 10 in. (17.32 m). Standard width is 32 ft. 10 in. (10 m).
Optional frame extensions: Available in 2 ft. (.61 m), 4 ft. (1.22 m), 8 ft. (2.44 m) and 12 ft. (3.66 m) lengths.
Optional power transition adjuster: Hydraulically adjusts for crown height and permits on-the-go crown adjustments.
Optional: Offset jack mounts, four to allow 2 ft. (.61 m) more between end cars without extending the main frame.

 

OPERATOR’S PLATFORM ASSEMBLY
Operator’s platform assembly is standard on both machines.

 

TEXTURING ASSEMBLY
10 ft. (3.05 m) wide with 5 in. (127 mm) long wire tines spaced to meet specification requirements.
Optional: Wire tine texturing members, fast change and built to specifications.

 

CURING ASSEMBLY
250 gal. (946.4 L) reservoir, pump with hydraulic motor and controls. Includes spray bar, windshield and work platform.
Optional: 350 gal. (1324.9 L) reservoir.
Optional: Platform assembly for reusable totes provides a quick cure tote exchange.
Optional: Spray bar, windshield and work platform extensions are available in 2 ft. (.61 m), 4 ft. (1.22 m), 8 ft. (2.44 m) and 12 ft. (3.66 m) lengths.

 

TRANSPORT AXLE (optional)
The transport axle is hydraulically powered with 6.7 in. (170 mm) x 15 in. (381 mm) 12 ply tires and removable towing tongue for job-site use only.

 

DIMENSIONS
Transport
Minimum width:
10 ft. 8.65 in. (3.27 m).
Minimum height: 10 ft. 7.35 in. (3.23 m).

Operational
Width:
12 ft. 10 in. (3.91 m) up to 56 ft. 10 in. (17.32 m).
Length: 12 ft. 8.97 in. (3.89 m).
Height: 12 ft. 7.88 in. (3.86 m).

WEIGHT (approximate)
(at 32 ft. 10 in. (10 m) standard width)
Basic unit 14,100 lbs. (6396 kg).

 

ADDITIONAL OPTIONS

  • 32 ft. 10 in. (10 m) texturing machine only, equipped same as standard machine, less curing system.
  • 32 ft. 10 in. (10 m) curing machine only, equipped same as standard machine, less wire tine texturing member assembly.
  • Skewed tining option.
  • Auto-Float® attachment, consult factory for specifications.
  • Burlap drag assembly available for both texture/cure machines.
  • Other options are available to customize machines to accommodate applications and customer needs.

 

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. OR FOREIGN PATENTS: 3,299,786; 3,450,011; 3,541,931; 3,779,661; 3,959,977; 4,073,592; 4,136,993; 4,226,917; 4,343,513; 4,360,293; D-266,850; 853,607; 861,819; 954,773; 406,787; 1,147,187; 133,220; D-512,249; 4,717,282; 4,457,645; C-1,110,893; C-1,191,044; 12,890-1-0010; 5,061,115; 7,509,187; 7,509,615; 5,102,267; 5,101,360; 4,954,019; 4,984,639; 5,190,397; 5,209,602; 0,518,535; 2,067,126; 494,257; 69,031,836.7-08; 2,069,516; 5,924,817; 2,833,084; 7,517,171 B2 AND PATENTS PENDING.

GOMACO Corporation reserves the right to make improvements in design, material, and/or changes in specifications at any time without notice and without incurring any obligation related to such changes.

Performance data is based on averages and may vary from machine to machine.

For More Information
T/C-400 Texture/Cure Machine Download The Texture/Cure Brochure (PDF Format)
T/C-400 Photos Download The GOMACO Full Line
Brochure (PDF Format)
T/C-400 Information In:
Deutsch - Español - Francais - Italiano
GOMACO World Stories
GHP-2800 Two-Track Paver Exceeds State Expectations - APAC-Tennessee Inc.

The New Skewed Tining Option For GOMACO Texture/Cure Machines

The New Bangkok International Airport Is Slipformed Exclusively With GOMACO Equipment - Italian-Thai Development Public Company, Ltd.

One Of The First Concrete Projects In Baja Paves With A First Of Its Kind Paver - Alta Ingenieria 2000

GHP-2800 Passes The Test For Japanese Airport - Toa Doro Kogyo Company, Ltd., and Taisei Rotec Corporation

Slipforming London Heathrow's T5 Project In England - AMEC

Operation Enduring Freedom - RED HORSE Squadron, United States Air Force

GHP-2800 With IDBI: Paving Over A Mile A Day In Argentina - Alquimac S.R.L., Green S.A. and Rovella Carranza S.A. (UTE)

Slipforming The Largest Concrete Project In Taiwan - Pacific Construction Company, Ltd.

Finally Slipforming - Maktas A.S. & Yenigun Construction Company


GOMACO Home / Curb & Gutter / Pavers / Placer/Spreaders / Trimmer/Placers / Texture/Cure Machines / Cylinder Finishers / Canal/Slope / Airports / Support Equipment / Contact Us! / Sitemap / GOMACO University / Gomaco Trolley Company / Godbersen Equipment Company

Copyright © 1998-2017
GOMACO Corporation Inc.
All Rights Reserved
web@gomaco.com or visit our feedback page