2019 GOMACO University Class Schedule


Date Course Location
January 8 - 11 2 & 4 Track Pavers G21/G22 Paving Center
The course will cover controls, setup, operation, optional attachments (excluding the IDBI), paving to profilograph specifications, maintenance, and diagnostics on pavers equipped with G21/G22 controls.

16 Seats Available
February 5 - 8 2 & 4 Track Pavers G21/G22 Paving Center
The course will cover controls, setup, operation, optional attachments (excluding the IDBI), paving to profilograph specifications, maintenance, and diagnostics on pavers equipped with G21/G22 controls.

15 Seats Available
March 5 - 8 2 & 4 Track Pavers G21/G22 Paving Center
The course will cover controls, setup, operation, optional attachments (excluding the IDBI), paving to profilograph specifications, maintenance, and diagnostics on pavers equipped with G21/G22 controls.

22 Seats Available
February 26 - March 1 2 & 4 Track Pavers G+ Paving Center
The course will cover controls, setup, operation, optional attachments (excluding the IDBI), paving to profilograph specifications, maintenance, and diagnostics on pavers equipped with G+ controls.

Class Full
February 12 - 15 2 & 4 Track Pavers G+ Paving Center
The course will cover controls, setup, operation, optional attachments (excluding the IDBI), paving to profilograph specifications, maintenance, and diagnostics on pavers equipped with G+ controls.

Class Full
March 26 - 29 2 & 4 Track Pavers G+ Paving Center
The course will cover controls, setup, operation, optional attachments (excluding the IDBI), paving to profilograph specifications, maintenance, and diagnostics on pavers equipped with G+ controls.

15 Seats Available
February 19 - 22 C-450 Cylinder Finisher University
The course will cover controls, setup, operation, maintenance, and diagnostics.

37 Seats Available
January 29 - February 1 COMM III_3-Trk G+ University
The course will cover controls, setup, operation, maintenance, and diagnostics of the three-track Commander III equipped with G+ controls.

31 Seats Available
January 8 - 11 COMM III_3-Trk G+ University
The course will cover controls, setup, operation, maintenance, and diagnostics of the three-track Commander III equipped with G+ controls.

36 Seats Available
March 12 - 15 COMM III_3Trk G21/G22 University
The course will cover controls, setup, operation, maintenance, and diagnostics of the three-track Commander III equipped with G21/G22 controls.

19 Seats Available
March 12 - 15 Concrete Mix Design University 2
This hands-on course will focus on the basics of concrete mix design as well as more advanced topics including cement types and application, aggregates, admixtures and optimizing the mix for paving applications. Troubleshooting will look at material incompatibility issues, edge slump, bugholes and other mix related issues. The second part of the course will concentrate on achieving specified values for strength and durability and an overview of basic concrete field and lab test procedures. More advanced test procedures will be either demonstrated or discussed and include maturity, chloride resistivity, calorimetry and numerous others that will likely be part of new or updated specifications. The course will feature practical, hands-on experience in the behavior of paste and mortar, as well as testing. The session will be taught by Dr. Michael Ayers, who is well known in the industry for his knowledge of concrete mixes.

5 Seats Available
February 19 - 22 GOMACO Pavesmart (C&G) Paving Center
The course will cover use of Leica Geosystems' PaveSmart 3D software for concrete slipform paving. Includes software setup, maintenance, and operation along with use on placer/spreaders and curb and gutter. The course will also cover the Leica Geosystems' handheld rover with VIVA software. Basic grade checking, stakeout, volumes and areas, data import and export will be covered. Diagnostics will conclude the course.

7 Seats Available
January 15 - 18 GOMACO Pavesmart (T&P) Paving Center
The course will cover use of Leica Geosystems' PaveSmart 3D software for concrete slipform paving. Includes software setup, maintenance, and operation along with use on placer/spreaders and curb and gutter. The course will also cover the Leica Geosystems' handheld rover with VIVA software. Basic grade checking, stakeout, volumes and areas, data import and export will be covered. Diagnostics will conclude the course.

Class Full
April 2 - 5 GOMACO Topcon MMGPS (C&G) Paving Center
The course will cover the use of Topcon's mmGPS solution for concrete curb and gutter. Includes machine operation, as well as data collection/grade verification. Diagnostics will conclude the course.

2 Seats Available
April 16 - 19 GOMACO Topcon MMPS (T& P) Paving Center
The course will cover the use of Topcon's mmGPS for pavers and trimmers. Includes machine operation, as well as data collection/grade verification. Diagnostics will conclude the course.

15 Seats Available
March 12 - 15 GOMACO Trimble (C&G) Paving Center
The course will cover the use of Trimble's PCS900 software for concrete slipform paving. Includes machine setup and operation, as well as the use of Trimble's data collection software. Diagnostics will conclude the course.

15 Seats Available
April 9 - 12 GOMACO Trimble (Paver) Paving Center
The course will cover the use of Trimble's PCS900 software for concrete slipform paving. Includes machine setup and operation as well as the use of Trimble's data collection software. Diagnostics will conclude the course.

11 Seats Available
March 26 - 29 GT-3600/G+ University
The course will cover controls, setup, operation, maintenance, and diagnostics for the GT-3600 equipped with G+ controls.

30 Seats Available
January 15 - 18 GT-3600/G+ University
The course will cover controls, setup, operation, maintenance, and diagnostics for the GT-3600 equipped with G+ controls.

34 Seats Available
February 26 - March 1 GT-3600/G+ University
The course will cover controls, setup, operation, maintenance, and diagnostics for the GT-3600 equipped with G+ controls.

32 Seats Available
January 22 - 25 GT-3600/G21 & G22 University
The course will cover controls, setup and operation, maintenance, and diagnostics for the GT-3600 equipped with G21/G22 controls.

6 Seats Available
January 29 - February 1 IDBI Paving Center
The course will cover controls, setup, operation, maintenance, and diagnostics.

18 Seats Available
March 19 - 22 Leica ICON Paver/Trimmer Paving Center


Class Full
January 22 - 25 Trimmers Paving Center
The course will cover controls, setup, operation, maintenance, and diagnostics.

8 Seats Available
April 2 - 5 Trimmers University
The course will cover controls, setup, operation, maintenance, and diagnostics.

33 Seats Available
April 9 - 12 Xtreme 3-Trk 3300; GT3600; COMM III University


40 Seats Available
March 5 - 8 Xtreme 3-Trk 3300; GT3600; COMM III University


25 Seats Available
February 12 - 15 Xtreme 3-Trk 3300; GT3600; COMM III University


28 Seats Available
February 5 - 8 Xtreme 3-Trk 3300; GT3600; COMM III University


21 Seats Available