Top Navigation

GP-2400 Specifications

ENGINE
Type:
Caterpillar® diesel engine (emission controlled).
Power: 174.5 hp (129.5 kW) @ 2200 rpm.
Fuel economy: 9.4 gph (35.58 Lph) @ 80% of rated hp.

 

SERVICE CAPACITIES
Fuel reservoir:
100 gal. (378.5 L).
Hydraulic oil reservoir: 161 gal. (609.45 L).

 

AUTOMATED CONTROL SYSTEM
Type:
Electronic-over-hydraulic.
Controls: GOMACO's exclusive G+® control system with self-diagnostics for grade and steering and smart steer controls for paving accuracy and ease of operation.

 

TELESCOPING FRAME
Telescoping:
Modular frame telescopes on the left side up to 6.5 ft. (2 m).

 

WATER SYSTEM
Two 100 gal. (378.5 L) polyurethane tanks with hydraulically driven high-pressure pump, trigger gun control, and adjustable pressure unloader for 0-2000 psi.

 

AUGER SYSTEM
Type:
Reversible 14 in. (356 mm) diameter hydraulically powered split auger. (3100 series open-front mold).
Speed: Up to 66.9 rpm.

 

TAMPER SYSTEM
Type:
Hydraulically powered split vertical tamping system.
Tamper Speed: Adjustable up to 120 strokes per minute.

 

HYDRAULIC SYSTEM
Pumps:
Two double-stage pumps provide oil to the vibrator, auger, and tamper circuits.
One load-sensed pump for the track circuit.
One pressure-compensated control lift pump.

Filtration
Type:
One 10 micron in-tank return filter, 25 psi bypass.
Three 100 mesh suction strainers, 3 psi bypass.
One 10 micron lift pressure filter, non bypass.

Hydraulic Oil Cooling
Stationary cooler:
One stationary cooler with engine-driven fan to cool vibrator, track and auger circuit oil.

 

SLIPFORM MOLD (3100 series open-front mold)
16 ft. mold: Hydraulically pressure-compensated sideplates with adjustment up to 19 in. Additional insert sections for paving widths up to 24 ft. optional. Power transition adjuster (PTA) available for transitions.
International 5 m mold: Hydraulically pressure-compensated sideplates with adjustment up to 483 millimeters. Additional insert sections for paving widths up to 7.5 meters optional. Power transition adjuster (PTA) available for transitions.

 

VIBRATORS
Type:
Hydraulic motor-in-head powering an eccentric weight.
Quantity: 10 vibrators and 18 vibrator circuits are standard.<

 

TWO-TRACK SYSTEM
Type:
Two hydraulically powered, gear-driven crawler tracks.
Overall track length: 10.4 ft. (3.17 m) including track fender.
Track pad width: 15.75 in. (400 mm).
Gearbox reduction: 131:1 gear reduction with two-speed hydraulic motors.
Track speed: Up to 35 fpm (11 mpm) operational mode and up to 105 fpm (32 mpm) in transport mode.
Ground pressure: 19 psi (131 kPa), based on 55,000 lb. (24,948 kg) with weight evenly distributed.
Leg height adjustment: 36 in. (914 mm) hydraulic adjustment.

 

FOUR-TRACK SYSTEM
Type: Four hydraulically powered, gear-driven crawler tracks.
Overall track length: 6.3 ft. (1.92 m) includes track fender.
Track pad width: 11.8 in. (300 mm).
Gearbox reduction: 100:1 gear reduction with two-speed hydraulic motors.
Track speed: Up to 44 fpm (13 mpm) operational mode and up to 96 fpm (29 mpm) in transport mode.
Ground pressure: 28 psi (193 kPa), based on 60,000 lb. (27,216 kg) with weight evenly distributed.
Leg height adjustment: 42 in. (1067 mm) hydraulic adjustment and manual adjustment up to 28 in. (711 mm) for a total height adjustment of 70 in. (1778 mm).
Leg positioning: Each leg has manual leg-mount pivoting arms which allow the leg to pivot up to 19 in. (483 mm) to the outside and up to 15 in. (381 mm) to the inside from the straight-ahead position.

 

WEIGHTS (approximate, based on standard machine)
Two-track transport weight without mold: 37,000 lbs. (16,783 kg) with series two tracks.
Two-track operational weight: 55,000 lbs. (24,948 kg) equipped with series two tracks, 16 ft. (5 m) 3100 series open-front mold.
Four-track transport weight without mold: 42,000 lbs. (19,051 kg) with series two tracks.
Four-track operational weight: 60,000 lbs. (27,216 kg) equipped with series two tracks, 16 ft. (5 m) 3100 series open-front mold.
NOTE: Transport and operational weights are variable, depending on number of machine options.

 

TWO-TRACK DIMENSIONS (Based on standard machine with series two tracks and 3100 series open-front mold)
Paving width: Up to 16.5 ft. (5 m), with no inserts needed for frame.
Optional: Paving width up to 24 ft. (7.5 m), with additional vibrators and frame inserts.
Two-track minimum transport width: 10.4 ft. (3.17 m) with 3100 series open-front mold attached.
Two-track minimum transport length: 17.9 ft. (5.46 m).
Two-track minimum transport height: 9.8 ft. (2.99 m) without mold or 10.1 ft. (3.08 m) with 3100 series open-front mold attached.

 

FOUR-TRACK DIMENSIONS (Based on standard machine with series two tracks and 3100 series open-front mold)
Paving width: Up to 16.5 (5 m), with no inserts needed for frame.
Optional: Paving width up to 24 ft. (7.5 m), with additional vibrators and frame inserts.
Four-track minimum transport width: 8.2 ft. (2.5 m) without mold or work bridge or 10.2 ft. (3.11 m) with 3100 series open-front mold attached and work bridge.
Four-track minimum transport length: 29.6 ft. (9.02 m).
Four-track minimum transport height: 9.3 ft. (2.83 m) without mold or 10 ft. (3.05 m) with 3100 series open-front mold attached.

 

ATTACHMENTS/OPTIONS AVAILABLE
VHS, vertical hinged sideplates with hydraulic control and pressure-compensated.
Auto-Float® attachment.
5000 series open-front mold with 16 in. (406 mm) auger.
Air compressor and pressurized tank for air side bar inserters.
Two 150 gal. (567.8 L) steel tanks, 9.5 cfm (.27 cmm) air compressor, hose, and nozzles.
Frame extensions.
Grade averaging ski.
Sideplate extensions for bar insertion.
5400 series center bar inserter.
Manual side bar inserter.
Air-powered side bar inserter.
Hydraulic side bar inserter with vibration.
Keyway crimper and punch assembly.
Bolt-on male keyway attachments.
3D stringless control system.
V2 paving mold.
Other options are available to customize the machine in order to accommodate specific applications and customer needs.

 

Manufactured under one or more of the following U.S. or foreign patents: 5,190,397; 5,209,602; 5,924,817; 5,941,659; 6,099,204; 6,450,048; 2,211,331; 2,069,516; 7,044,680; 7,284,472; 7,517,171; 7,845,878; 7,850,395; and patents pending.

GOMACO, Auto-Float, and G+ are registered trademarks of GOMACO Corporation.

GOMACO Corporation reserves the right to make improvements in design, material, and/or changes in specifications at any time without notice and without incurring any obligation related to such changes. Performance data is based on averages and may vary from machine to machine.

 

 

 

For More Information
GP-2400 Slipform Paver   Download The GP-2400 Slipform Paver Brochure (PDF Format)
GP-2400 Photos   Download The Whitetopping Brochure
(PDF Format)
   
GOMACO World Stories

GOMACO Snapshots 43.1 - Hamburg, Pennsylvania

Overlay Success on an Important Nebraska Link - Paulsen Inc.

GOMACO Snapshots 42.1 - Montgomery, Indiana

A Versatile New Paver for Paving Specialists in Texas - J.D. Abrams LP

 

Around The World 40.1 - Maga Naguma Road Construction Equipment Company

GP-2400 Slipforms a Project to Help Alleviate Traffic Congestion in the Philippines - C.M. Pancho Construction Company

   

GOMACO Home / Curb & Gutter / Pavers / Placer/Spreaders / Trimmer/Placers / Texture/Cure Machines / Cylinder Finishers / Canal/Slope / Airports / Support Equipment / Contact Us! / Sitemap / GOMACO University / Gomaco Trolley Company / Godbersen Equipment Company

Copyright © 1998-2017
GOMACO Corporation Inc.
All Rights Reserved
web@gomaco.com or visit our feedback page