The 16 foot (4.88 m) long conveyor aids the Xtreme GT-3600 as it slipforms 21 inch (533 mm) tall stand-up curb by feeding the hopper at a maximum belt speed of 284 feet per minute (86.6 mpm).
The GOMACO Xtreme GT-3600 is slipforming an 18 inch (457 mm) stand-up curb and is equipped with the GOMACO Remote Diagnostics (GRD) allowing for remote upgrades and fleet management from a cell phone or laptop computer.
This GOMACO three-track Xtreme GT-3600 is simultaneously trimming and pouring curb and gutter in Ankeny, Iowa.
All the capabilities of the Xtreme GT-3600 allow you to quickly and efficiently pour today’s parking lot designs for curb and gutter.
This GOMACO Xtreme GT-3600 with Topcon mmGPS 3D guidance is slipforming curb and gutter in Orillia, Ontario, Canada.
The Xtreme GT-3600 slipforms a stand-up curb with tight radii using 3D machine guidance.
An Xtreme GT-3600 with Topcon mmGPS 3D guidance is slipforming curb and gutter for a street rehabilitation project in New Liskeard, Ontario, Canada.
The Xtreme GT-3600 slipforms roll-over curb in a new developmental area.
An 18 inch (457 mm) curb and gutter is slipformed using 3D machine guidance by the Xtreme GT-3600 in a new residential development.
An Xtreme GOMACO GT-3600 with Topcon mmGPS 3D guidance is slipforming concrete curb and gutter in Billings, Montana.
A GOMACO Xtreme GT-3600 slipforms curb and gutter for a new subdivision using 3D machine guidance.
The exclusive independent adjustable stainless steel troweling section at the end of the curb and gutter mold seals and provides a superior GOMACO finish.
Parking lot island radii are a breeze with the Xtreme GT-3600’s steering capabilities and 3D machine guidance. Combining the sensored All-Track Steering and sensored All-Track Positioning has made the Xtreme GT-3600 the ultimate, intelligent slipform curb and gutter machine.
Designed for easy transportation, the Xtreme GT-3600 curb and gutter machine can be driven straight onto the truck bed after a day of slipforming.
A GOMACO Xtreme GT-3600 slipforms a five foot (1.52 m) sidewalk with 3D machine guidance.
The Xtreme GT-3600’s tracks can rotate farther than ever before. The rotary-sensored slew drives allow the tracks to rotate 90 degrees and more for quick side travel and job-site mobility.
The intelligent All-Track Positioning on the Xtreme GT-3600 includes a smart hydraulic cylinder on all three legs. The smart cylinders allow G+ to know the position of all three tracks and can make steering adjustments as needed.
The Xtreme GT-3600 features the GOMACO three-sensor radius system for stringline. When paving with stringline, the lead steering wand is allowed to leave the stringline and reference is switched to sensor number two for traveling around the tight radius.
The powerful trimmerhead features a direct drive radial piston hydraulic motor that provides maximum torque for tough trimming applications.
I want to personally thank everyone at GOMACO for all of the great care that you and your associates have provided us over the past 23 years! I can’t believe it’s been that long since we first bought our first GT-3600 in 1993!
From our point of view, there was never any other machine manufacturer we were going to buy our equipment from except GOMACO! The quality of the equipment is far greater than any other machine on the market. And when there was ever a problem, your team had it solved in no time. It’s like the Master Card commercial. Your service and dedication is and always has been PRICELESS!!!
But our friendship and personal relationship has been a fantastic partnership that has shown that even in these fast-paced times we live in, true friends and partners can be found no matter how apart they may live. Honesty and reliability are two traits we both possess. Thanks again for all your support.
WS42.1
Good Value For Our Money
The GT-3600 is the correct size for our type of work and offers us all the necessary options. It was a good value for our money, it offers a solution to our projects at a good price, and it gives us the flexibility and ability to pour curbs, sidewalk, or cycle track.
GW46.1
Tight Radius Work
We chose the GT-3600 to do tight radius work and we see it being utilized in our parking lot work and also in radius work on city streets. I like its versatility for our company. That was the main thing that drew us to it... more production, less handwork. It puts out great looking curb. It’s been a good purchase for us and we’ll continue to keep utilizing it. The GT-3600 is handling 44 inch (1118 mm) wall with no problems and it’s doing a good job. If everything goes well it’s kind of boring, but it’s only boring if your set up is correct and you have a machine as dependable as a GOMACO.