GOMACO equipment is the contractor's choice for concrete paving on sidewalk and recreational trail projects throughout the world.
GOMACO's line includes concrete slipform paving equipment for a wide range of paving projects, including highways, airports, curb and gutter, sidewalk and trail, monolithic sidewalk and curb and gutter, barrier and parapet, tunnel, rails, canals, bridges, and much more. GOMACO machines will meet the strictest specifications and requirements that are needed today.
Contact us today to learn how GOMACO equipment can be used to help make a profit on your project.
A Lifetime of GOMACO Equipment (Canada)
Workload Creates Demand for a New Paver in Wisconsin (United States)
Commander III Power On A Mono Project In Arizona (United States)
Commander III Versatility Rocks! (Australia)
Slipping 10 Foot (3 m) Wide Dolly Pads With A GT-3600 (United States)
Trimming and Pouring Eight Feet (2.4 m) Wide With A Commander III (United States)
Moving Forward While Slipforming In Reverse (United States)
Radii: Large Or Small, The GT-3600 Slipforms Them All In California (United States)
First Time Slipforming In Australia (Australia)
Chris Buchanan Explains Stringless Sidewalk (United States)
Blazing A Trail (United States)
Love At First Sight (United States)
GT-3600: From Amphitheater Seating To Golf Cart Paths (United States)
Charleston, South Carolina
An Xtreme GT-3600 slipforms a five foot (1.52 m) sidewalk with 3D machine guidance.
Wales, Wisconsin
A Commander III is slipforming four miles (6.4 km) of sidewalk in Wales, Wisconsin.
Read more about this project in GOMACO World 43.1.
Buckeye, Arizona
This Commander III is equipped with a monolithic trimmerhead and mold. It simultaneously trims the correct profile as the monolithic sidewalk and curb and gutter is slipformed. The monolithic profile is a five foot (1.52 m) sidewalk with a 36 inch (914 mm) roll curb.
Read more about this project in GOMACO World 37.1.
Australia
A 9.8 foot (3 m) wide paving package on this three-track Commander III allows an Australian contractor to slipform 8.1 miles (13 km) of new roadway.
Read more about this project in GOMACO World 35.2.
Casper, Wyoming
This GOMACO Commander III is simultaneously trimming and pouring an eight foot (2.4 m) wide sidewalk and bicycle path in Casper, Wyoming. Stringline was not used on the project, and the machine was operated in manual steering.
Sarasota, Florida
A Commander III is simultaneously trimming and slipforming a 10 foot (3.05 m) wide sidewalk.
Chile
A contractor paves a single lane 11 feet 6 inches (3.5 m) wide with a three-track Commander III equipped with a 12 foot (3.66 m) paving package in Santiago, Chile.
Independence, Iowa
This Commander III is simultaneously trimming and pouring an eight foot (2.4 m) wide, five inch (127 mm) thick, recreational trail in Independence, Iowa.
Read more about this project in GOMACO World 35.1.
Raleigh, North Carolina
A Commander III is slipforming five foot (1.5 m) wide sidewalk near Raleigh, North Carolina.
Read more about this project in GOMACO World 34.1.
Lincoln, Alabama
Monolithic sidewalk and curb and gutter is another application for the GOMACO Commander III. The monolithic trimmerhead did the fine trimming for two levels of grade to exacting specifications.
Cedar Rapids, Iowa
This contractor in Cedar Rapids, Iowa, used their Commander III to slipform a concrete path 10 feet (3.05 m) wide and five inches (127 mm) thick.
Read more about this project in GOMACO World 29.1.
Ponoka, Alberta, Canada
A Commander III is trimming and slipforming monolithic sidewalk and curb and gutter in Canada.
French Camp, California
This contractor uses their Commander III to slipform monolithic sidewalk and curb and gutter in California. They have also used their machine on parking lot projects and to pour landing pads for truck trailers.
Read more about this project in GOMACO World 29.1.
Thornton, Colorado
Using 3D machine guidance, this Commander IIIx slipforms monolithic sidewalk and curb and gutter in a new subdivision of Thornton, Colorado.
Fruita, Colorado
A ten foot (3.05 m) wide bike path is slipformed by a three-track GOMACO Commander IIIx.
Meridian, Ohio
A five foot (1.52 m) wide sidewalk in a new housing development in Meridian, Ohio, is being slipformed by a Commander IIIx three-track using trim and pour for maximum material utilization.
Calgary, Alberta, Canada
A three-track GOMACO Commander IIIx slipforms monolithic sidewalk and curb and gutter.
Winter Haven, Florida
A GT-3600 is trimming and slipforming this four foot (1.2 m) wide sidewalk in Winter Haven, Florida.
Thomasville, Alabama
Meeting specifications, minimum-clearance versatility, and high production are achieved with a GOMACO GT-3600 slipforming this five foot (1.52 m) wide sidewalk in Alabama.
Topeka, Kansas
The GT-3600 slipforms a 10 foot (3 m) wide sidewalk with a centermounted mold.
Ruskin, Florida
This GOMACO GT-3600 is slipforming a five foot (1.5 m) wide sidewalk in Florida.
Joliet, Illinois
This GT-3600 slipforms 10 foot (3 m) wide and eight inch (203 mm) thick dolly pads at a distribution facility.
Read more about this project in GOMACO World 35.1.
Rockford, Michigan
A GT-3600 slipforms 18 holes of continuous golf cart path on this course in Rockford, Michigan. This golf cart path is eight feet (2.44 m) wide, four inches (102 mm) thick, and 30,200 feet (9205 m) in length.
Read more about this project in GOMACO World 27.1.
Saw Mill, North Carolina
The GT-3600's All-Track Positioning (ATP) allows this contractor to move the leg over so the track isn't running on the newly slipformed curb and gutter.
Read more about this project in GOMACO World 31.2.
Australia
A 9.8 foot (3 m) wide mold was undermounted on this GT-3600 on a roadway project in New South Wales, Australia.
Read more about this project in GOMACO World 32.1.
Saw Mill, North Carolina
The GT-3600 with All-Track Positioning (ATP) provides easy set up for slipforming sidewalk next to the existing slab. Steering and grade are referenced off the existing curb or can be referenced off the stringline.
Belgium
This contractor slipforms a 9.8 foot (3 m) wide recreational path in Aalst, Belgium. Their GT-3600 features the exclusive GOMACO operating system with both the English and Dutch languages.
Belarus
A GT-3600 with a centermounted sidewalk mold is slipforming on a project in Brest, Belarus, close to the border with the country of Poland.
Redding, California
This GT-3600 slipformed meandering sidewalk through a park in Redding, California. It was a project that included areas of 100 foot (30.5 m) long radii.
Read more about this project in GOMACO World 33.1.
Red Deer, Alberta, Canada
The GT-3200 sidewalk paver has a 20 inch (508 mm) wide, 14 foot (4.27 m) long folding conveyor. The conveyor allows ready-mix trucks to discharge from the street instead of driving over existing curb to reach the paver.
Red Deer, Alberta, Canada
The conveyor on the GOMACO GT-3200 sidewalk paver is operated by the ground person to manage how far the conveyor needs to be folded in order to avoid this light pole or other obstacles during paving.
Regina, Saskatchewan, Canada
The GT-3200 above is slipforming an eight foot (2.44 m) wide sidewalk. The hydraulic pivoting conveyor has been designed to rotate 90 degrees in either direction from center to allow for easy loading of concrete into the hopper from either side of the machine and to avoid obstacles associated with zero-clearance paving.
Edmonton, Alberta, Canada
The conveyor on this GT-3200 sidewalk paver is being manipulated around trees and light poles, while the paver continues the sidewalk pour. The GT-3200 is slipforming five foot (1.5 m) wide sidewalk.
Regina, Saskatchewan, Canada
The GT-3200 sidewalk paver can slipform widths up to 12 feet (3.66 m) with a well-prepared grade.
Red Deer, Alberta, Canada
The GT-3200 sidewalk paver can be equipped with a trimmerhead for fine grade trimming. The GT-3200 above is simultaneously trimming the grade and slipforming the sidewalk for a residential area.
Edmonton, Alberta, Canada
An aggregate base mold for the GT-3200 sidewalk paver prepares the grade and features a spreader auger. The aggregate material is placed in front of the machine and the auger spreads the material the width of the mold.
Toronto, Ontario, Canada
The GT-3200 sidewalk paver is specifically designed for sidewalks and minimum-clearance projects. This GT-3200 is slipforming a 10 foot (3 m) wide sidewalk.
Calgary, Alberta, Canada
A GT-3200 sidewalk paver slipforms a five foot (1.5 m) wide sidewalk through a housing development.
St. Peter, Minnesota
Ten foot (3 m) wide sidewalk is slipformed with the GT-3200 sidewalk paver in a new development in St. Peter, Minnesota.
Toronto, Ontario, Canada
This contractor's GT-3200 sidewalk paver can be outfitted with either a 5.9 foot (1.8 m) rock placing mold or a minimum-clearance trimmer.
Read more about this project in GOMACO World 44.1.
Toronto, Ontario, Canada
A contractor in Canada has slipformed between 4.9 and 5.9 feet (1.49 and 1.79 m) wide with their GOMACO GT-3200 sidewalk paver.
Battle Creek, Iowa
A GT-3200 slipforms a walking trail with an undermounted mold.
Ida Grove, Iowa
This GT-3200 is slipforming a golf cart path in Ida Grove, Iowa.