GOMACO equipment is the contractor's choice for concrete paving on curb and gutter projects throughout the world.
GOMACO's line includes concrete slipform paving equipment for a wide range of paving projects, including highways, airports, curb and gutter, sidewalk and trail, monolithic sidewalk and curb and gutter, barrier and parapet, tunnel, rails, canals, bridges, and much more. GOMACO machines will meet the strictest specifications and requirements that are needed today.
Contact us today to learn how GOMACO equipment can be used to help make a profit on your project.
Explosive Production At A Former Munitions Factory (United States)
3300 Versatility At Work In Arkansas (United States)
A Commander III Like No Other (Canada)
A New Commander III for the Next Generation of Valley (Canada)
Buying a Machine on a Dare (Canada)
Slipforming Curb And Gutter For The Athletes Of The World (Canada)
Another High-Production Day For Shirley Concrete... (United States)
The Power Of Choice... (United States)
Mountain Conditions Can't Slow Down A Commander III (Canada)
The Deuce is Back! (United States)
Slipping Around Tourists And Tombstones (United States)
A Lifetime of GOMACO Equipment (Canada)
GT-3600: The Machine of Choice for Two New Contractors in Belgium (Belgium)
G+® and 3D: Putting the Fun Back Into Curb and Gutter (United States)
Stringless Curb and Gutter Is Here! (United States)
Island Hopping With The GT-3600 (United States)
Preparation Meets Opportunity On A Record-Setting Day (United States)
12 Percent Grades Can't Slow Down A GT-3600 (United States)
The Power Of Choice... (United States)
Challenges Abound On A Project "Fore!" The GT-3600 (United States)
Surrey, British Columbia, Canada
The three-track Commander IIIx uses rotary-sensored slew drives on each track to slipform this curved curb and gutter on a residential street in Canada. This Commander IIIx is equipped with GOMACO Remote Diagnostics (GRD) to assist in fleet management through your cell phone or laptop computer.
Hiawatha, Iowa
This Xtreme GT-3600 is pouring tight-radius for a convenience store parking lot project in Hiawatha, Iowa.
Cranbury, New Jersey
This 3300 is equipped with a sideshifting trimmerhead and curb mold, and is simultaneously trimming and pouring curb and gutter in Cranbury, New Jersey.
Read more about this project in GOMACO World 46.1.
Uniontown, Pennsylvania
A 3300 slipforms curb and gutter on the right side with 3D machine guidance in Uniontown, Pennsylvania. Right-side slipforming is beneficial to contractors because it allows the concrete trucks to drive ahead of the paver and easily back up to deliver the concrete without disrupting the flow of traffic.
Montgomery, Alabama
The GOMACO 3300 features a power-slide rear leg to position the leg for weight distribution.
Cranbury, New Jersey
The 3300 is designed for right-side and left-side pours. The U-shaped operator’s platform and sliding console allow for optimum visibility and control to pave in either direction.
Windsor, Ontario, Canada
In Windsor, Ontario, Canada, a 3300 slipforms curb and gutter using 3D machine guidance.
Belgium
This 3300 slipforms curb and gutter on a narrow street in Westrozebeke, Belgium.
Coaldale, Alberta, Canada
A Commander IIIx three-track slipforms curb and gutter using 3D machine guidance in a new residential development in Coaldale, Alberta, Canada.
La Crosse, Wisconsin
The three-track Commander IIIx is simultaneously trimming and slipforming curb and gutter in La Crosse, Wisconsin.
Dalton, Georgia
The Commander IIIx features a platform that has a skid-resistant surface on the walkway for safety and is vibration isolated for operator comfort during a full day of slipform paving.
Las Vegas, Nevada
This contractor slipforms curb and gutter on a project in Las Vegas, Nevada, with their Xtreme Commander IIIx.
Surrey, British Columbia, Canada
The Xtreme Commander IIIx was put to work slipforming curb and gutter in a new housing development in Surrey, British Columbia, Canada.
Dalton, Georgia
A three-track Xtreme Commander IIIx is slipforming curb and gutter in Dalton, Georgia.
La Crosse, Wisconsin
A three-track Commander IIIx slipforms curb and gutter in a residential area in La Crosse, Wisconsin.
Winfield, British Columbia, Canada
This GOMACO Commander III is simultaneously trimming and slipforming rollover curb and gutter at the Lakes Subdivision in the lake country of Winfield, British Columbia, Canada.
India
A three-track Commander III was used to slipform stand-up curb along a new roadway in Bijapur, a city in the state of Karnataka, south of Mumbai, India.
Russia
This contractor slipforms curb and gutter with their three-track Commander III in Kemerovo Oblast, Russia.
Whistler, British Columbia, Canada
Four different types of curb and gutter were slipformed with a Commander III as part of the 2010 Winter Olympics Athletes’ Village in Whistler, British Columbia, Canada.
Read more about this project in GOMACO World 37.2.
Hattiesburg, Mississippi
A Commander III equipped with a 42 inch (1067 mm) wide sectionalized trimmerhead is simultaneously trimming and pouring curb and gutter in Hattiesburg, Mississippi.
Topeka, Kansas
The Commander III slipformed curb and gutter with a male keyway along a side street on southwest Topeka Boulevard in Topeka, Kansas.
Read more about this project in GOMACO World 29.2.
Halifax, Nova Scotia, Canada
The sideshifting, vertical-lifting trimmerhead and mold helped this contractor in Nova Scotia, Canada, maneuver a Commander III in minimum-clearance situations.
Read more about this project in GOMACO World 29.1.
Charleston, South Carolina
The intelligent All-Track Positioning on the Xtreme GT-3600 includes a smart hydraulic cylinder on all three legs. The smart cylinders allow the G+ control system to know the position of all three tracks and make steering adjustments as needed.
Hiawatha, Iowa
An Xtreme GT-3600 equipped with Topcon 3D guidance is slipforming curb and gutter in Hiawatha, Iowa.
Paducah, Kentucky
The Xtreme GT-3600 slipforms curb and gutter using 3D machine guidance to maximize its minimum-clearance capabilities.
Morristown, Tennessee
An Xtreme GT-3600 is slipforming an 18 inch (457 mm) stand-up curb and is equipped with the GOMACO Remote Diagnostics (GRD) allowing for remote upgrades and fleet management from a cell phone or laptop computer.
Oak Creek, Wisconsin
An Xtreme GT-3600 is slipforming curb and gutter at the Aurora Medical Center in Oak Creek, Wisconsin.
Ramsey, Minnesota
The exclusive independent adjustable stainless steel troweling section at the end of the curb and gutter mold on this Xtreme GT-3600 seals and provides a superior GOMACO finish.
Cedar Falls, Iowa
Parking lot island radii are a breeze with the Xtreme GT-3600’s steering capabilities and 3D machine guidance.
Charleston, South Carolina
Curb and gutter is being slipformed by an Xtreme GT-3600 equipped with Trimble 3D guidance.
Murfreesboro, Tennessee
A contractor slipformed radii as tight as 2.5 feet (0.8 m) with their GT-3600 curb and gutter machine with Topcon mmGPS on a parking lot project in Murfreesboro, Tennessee.
Read more about this project in GOMACO World 42.1.
Franklin, Wisconsin
Several different curb and gutter and island profiles were slipformed with this GT-3600 in Franklin, Wisconsin.
Read more about this project in GOMACO World 36.1.
Belgium
This GOMACO GT-3600 slipforms curb and gutter for a new street in Zingem, East Flanders, Belgium.
Toronto, Ontario, Canada
A GT-3600 slipforms the curb and gutter portion of two-stage curb on a new road for a subdivision in Toronto, Ontario, Canada.
Halifax, Nova Scotia, Canada
Twelve inch (305 mm) stand-up curb for a new apartment complex is slipformed with a GT-3600 with Topcon 3D guidance in Halifax, Nova Scotia, Canada.
Belgium
A GOMACO GT-3600 is used to slipform a unique profile on a project in Koksijde, Belgium.
Trinidad
A GT-3600 slipforms curb at a new power plant in Trinidad.
Halifax, Nova Scotia, Canada
This GT-3600 slipforms curb and gutter next to traffic on a road in Halifax, Nova Scotia, Canada.
Saint John, New Brunswick, Canada
The GT-3600's compact paving width makes it an ideal machine for working within confined spaces, like the curb and gutter in this tunnel project in Saint John, New Brunswick, Canada.
Meridian/Boise, Idaho
Stringless curb and gutter is slipformed with a GT-3600 with 3D guidance on a parking lot project in the Meridian/Boise area in Idaho.
United Arab Emirates
This contractor slipforms a unique profile of curb and gutter with a GOMACO GT-3600 on a project in Abu Dhabi, United Arab Emirates.
Dillsboro, Indiana
A GT-3600 slipforms curb and gutter below grade on a rehabilitation project in Dillsboro, Indiana. Using the telescoping mold and hold-down, the GT-3600 is able to achieve minimum-clearance as it passes a residential telephone pole.
St. John's, Newfoundland, Canada
This GT-3600 slipforms a 16 inch (406 mm) curb in St. John's, Newfoundland, Canada.
St. Louis, Missouri
This contractor is slipforming approximately 14,000 feet (4267 m) of curb and gutter on a 50 acre (20.2 ha) lot with a GT-3600. The curb and gutter’s profile is 30 inches (762 mm) wide, seven inches (178 mm) thick, with a six inch (152 mm) curb.
Read more about this project in GOMACO World 37.2.
Gulfport, Mississippi
The GT-3600 uses the simultaneous trim/pour process for maximum concrete utilization on this project in Gulfport, Mississippi.
Medina, Tennessee
This GT-3600 is slipforming roll-over style curb and gutter in a subdivision project in Tennessee.
Read more about this project in GOMACO World 35.1.
West Palm Beach, Florida
A Commander II was simultaneously trimming and pouring 24 inch (610 mm) wide, 7.5 inch (191 mm) tall valley gutter at the Banyan Cay Resort & Golf in West Palm Beach, Florida.
Read more about this project in GOMACO World 46.1.
West Palm Beach, Florida
Concrete is fed into the hopper of the Commander II by a 20 inch (508 mm) wide, six foot (1.83 m) long conveyor belt. The Commander II features a belt speed of 350 feet per minute (106.68 mpm) to quickly move the concrete into the hopper.
West Palm Beach, Florida
The GOMACO Commander II is able to slipform curb and gutter utilizing the smooth travel speeds of the G+ control software.
Washington
The Commander II is slipforming a five foot (1.52 m) curb radius. The sidemounted design provides minimum side clearance.
Australia
This GOMACO GT-3200 with Topcon 3D guidance is slipforming curb and gutter in Australia.
Ireland
Stand-up curb is the first step for this street rehabilitation project in Wexford, Ireland. The contractor utilized a GT-3200 on the job.
United Arab Emirates
The operator’s platform on the GT-3200 provides an ample view of the entire slipforming operation on this project in Abu Dhabi, United Arab Emirates.
Australia
The GOMACO GT-3200 can also be equipped with an optional 13.5 foot (4.1 m) long charging conveyor to move concrete to the hopper.
Dickeyville, Wisconsin
The GT-3200 slipforms curb and gutter around a radius on a subdivision project in Dickeyville, Wisconsin.
Richmond, Virginia
The GT-3200 features the simultaneous trim/pour concept for maximum concrete utilization. This machine is slipforming 30 inch (762 mm) curb and gutter in Richmond, Virginia.
Faroe Islands
This GOMACO Curb Cadet is pouring curb in the Faroe Islands. Curb may be poured on either side of the machine, and the hopper and mold are adjustable up to 15 inches (381 mm).
Norway
A Curb Cadet is pouring curb over continuous steel in Norway.